spectre::analysis::dc

Struct DcOp

pub struct DcOp;

Expand description

A DC operating point analysis.

Trait Implementations§

impl Analysis for DcOp

type Output = OpOutput

The output produced by this analysis.

impl Clone for DcOp

fn clone(&self) -> DcOp

Returns a copy of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for DcOp

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl<'de> Deserialize<'de> for DcOp

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more

impl From<DcOp> for Input

fn from(value: DcOp) -> Self

Converts to this type from the input type.

impl Save<Spectre, DcOp> for NestedNode

type SaveKey = VoltageSaveKey

The key type used to address the saved output within the analysis. Read more

type Saved = f64

The saved data associated with things object.

fn save( &self, ctx: &SimulationContext<Spectre>, opts: &mut <Spectre as Simulator>::Options, ) -> <Self as Save<Spectre, DcOp>>::SaveKey

Marks the given output for saving, returning a key that can be used to recover the output once the simulation is complete.

fn from_saved( output: &<DcOp as Analysis>::Output, key: &<Self as Save<Spectre, DcOp>>::SaveKey, ) -> <Self as Save<Spectre, DcOp>>::Saved

Recovers the desired simulation output from the analysis’s output.

impl Save<Spectre, DcOp> for NestedTerminal

type SaveKey = (VoltageSaveKey, CurrentSaveKey)

The key type used to address the saved output within the analysis. Read more

type Saved = NestedTerminalOutput

The saved data associated with things object.

fn save( &self, ctx: &SimulationContext<Spectre>, opts: &mut <Spectre as Simulator>::Options, ) -> <Self as Save<Spectre, DcOp>>::SaveKey

Marks the given output for saving, returning a key that can be used to recover the output once the simulation is complete.

fn from_saved( output: &<DcOp as Analysis>::Output, key: &<Self as Save<Spectre, DcOp>>::SaveKey, ) -> <Self as Save<Spectre, DcOp>>::Saved

Recovers the desired simulation output from the analysis’s output.

impl Save<Spectre, DcOp> for RawNestedNode

type SaveKey = VoltageSaveKey

The key type used to address the saved output within the analysis. Read more

type Saved = f64

The saved data associated with things object.

fn save( &self, ctx: &SimulationContext<Spectre>, opts: &mut <Spectre as Simulator>::Options, ) -> <Self as Save<Spectre, DcOp>>::SaveKey

Marks the given output for saving, returning a key that can be used to recover the output once the simulation is complete.

fn from_saved( output: &<DcOp as Analysis>::Output, key: &<Self as Save<Spectre, DcOp>>::SaveKey, ) -> <Self as Save<Spectre, DcOp>>::Saved

Recovers the desired simulation output from the analysis’s output.

impl Save<Spectre, DcOp> for SaveOutput

type SaveKey = ()

The key type used to address the saved output within the analysis. Read more

type Saved = OpOutput

The saved data associated with things object.

fn save( &self, _ctx: &SimulationContext<Spectre>, _opts: &mut <Spectre as Simulator>::Options, ) -> <Self as Save<Spectre, DcOp>>::SaveKey

Marks the given output for saving, returning a key that can be used to recover the output once the simulation is complete.

fn from_saved( output: &<DcOp as Analysis>::Output, _key: &<Self as Save<Spectre, DcOp>>::SaveKey, ) -> <Self as Save<Spectre, DcOp>>::Saved

Recovers the desired simulation output from the analysis’s output.

impl Serialize for DcOp

fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>
where S: Serializer,

Serialize this value into the given Serde serializer. Read more

impl SupportedBy<Spectre> for DcOp

fn into_input(self, inputs: &mut Vec<<Spectre as Simulator>::Input>)

Convert the analysis into inputs accepted by this simulator.

fn from_output( outputs: &mut impl Iterator<Item = <Spectre as Simulator>::Output>, ) -> <Self as Analysis>::Output

Convert this simulator’s outputs to the analysis’s expected output.

Auto Trait Implementations§

impl Freeze for DcOp

impl RefUnwindSafe for DcOp

impl Send for DcOp

impl Sync for DcOp

impl Unpin for DcOp

impl UnwindSafe for DcOp

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

impl<T> Downcast for T
where T: Any,

fn into_any(self: Box<T>) -> Box<dyn Any>

Converts Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>, which can then be downcast into Box<dyn ConcreteType> where ConcreteType implements Trait.

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Converts Rc<Trait> (where Trait: Downcast) to Rc<Any>, which can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.

fn as_any(&self) -> &(dyn Any + 'static)

Converts &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Converts &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.

impl<T> DowncastSend for T
where T: Any + Send,

fn into_any_send(self: Box<T>) -> Box<dyn Any + Send>

Converts Box<Trait> (where Trait: DowncastSend) to Box<dyn Any + Send>, which can then be downcast into Box<ConcreteType> where ConcreteType implements Trait.

impl<T> DowncastSync for T
where T: Any + Send + Sync,

fn into_any_sync(self: Box<T>) -> Box<dyn Any + Sync + Send>

Converts Box<Trait> (where Trait: DowncastSync) to Box<dyn Any + Send + Sync>, which can then be downcast into Box<ConcreteType> where ConcreteType implements Trait.

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Converts Arc<Trait> (where Trait: DowncastSync) to Arc<Any>, which can then be downcast into Arc<ConcreteType> where ConcreteType implements Trait.

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> FromRef<T> for T
where T: Clone,

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<T> IntoRequest<T> for T

fn into_request(self) -> Request<T>

Wrap the input message T in a tonic::Request

impl<T> Pointable for T

const ALIGN: usize = _

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

impl<T> Primitive for T

impl<T> Primitive for T
where T: Clone + Send + Sync + Any,